Measuring for door graphics
Using a tape measure find the height of your
door. eg. measure from under the mirror to bottom door seal.
This distance will allow you to estimate how far you want
the banner/roll-call graphics to extend and how many logos
you require. Note that width is also an issue. Roughly take
note as to how wide you want you graphics to be by using the
tape measure.
Now use the sizing graph (on right) to estimate
what size and the number of logos you require.
Note: As banner / roll-call
graphics are made from using different logos, the sizing dimmensions
we suggest are only approximates. Please contact Bladerunner
Graphics before ordering if you require specific dimmension
and/or additional logos.
| This graph shows
the approximate dimmensions based on using 7 logos.
| When using less
than 7 logos allow the following:
200mm allow 40mm per logo
250mm allow 51mm per logo
300mm allow 61mm per logo
350mm allow 72mm per logo
|
