Measuring for rear window graphics
Using a tape measure find the height of your
rear window measuring from the centre. This distance will
allow you to estimate how far you want the banner/roll-call
graphics to extend and how many logos you require. Note that
width is also an issue. Roughly take note as to how wide you
want you graphics to be by using the tape measure.
Now use the sizing graph (on right) to estimate
what size and the number of logos you require.
note:
as banner / roll-call graphics are made from using different
logos, the sizing dimmensions we suggest are only approximates.
Please contact Bladerunner
Graphics before ordering if you require specific dimmension
and/or additional logos.
| This graph shows
the approximate dimmensions based on using 9 logos.
| When using less
than 9 logos allow the following:
200mm allow 43mm per logo
250mm allow 54mm per logo
300mm allow 65mm per logo
350mm allow 75mm per logo
400mm allow 86mm per logo
|
